Pressure modules generate positive pressure in a Closed room. These are designed to provide a clean area within a small enclosure. These are source of fresh air in the room. Body is made of Wood, mild steel duly Powder coated OR Stainless SteelPressure modules generate positive pressure in a Closed room. These are designed to provide a clean area within a small enclosure. These are source of fresh air in the room. Body is made of Wood, mild steel duly Powder coated OR Stainless SteelHEPA Filters are made out of micro glass fibre with corrugated aluminum foil separators and mounted in anodised aluminium frame sealed with epoxy sealant and is provided with rubber gasket for proper sealing.. Hepa filters are 99.97% efficient down to 0.2 to 0.3 microns and are protected by expanded metal sheet or plastic sheet and these hepa filters are provided with test reports. Hepa Filters are DOP tested from point to point with IPD less than 18mm WG and FPD less than 40mm WG at rated flow upto 1000 cfm ±20.and confirming to class 100 of revised US Federal Standard 209B. Blower Assembly consist of suitable American universal motor or equivalent working on 220V 50 Hz with a 15 amp. power point. Dynamically and statistically balanced blowers with air velocity 0.5 m/s make the unit least vibrant with minimum noise level i.e. less than 65db. Clean airvalocity 90 ± 20 FPM at the outlet of Hepa filters.

Standard Size (Working Area)            2' x 2'            3' x 2'            4' x 2'