Low temp. Incubator for Biochemical Oxygen Demand Determination.

Double walled, inner made of Stainless Steel 304 quality, outer made of thick best quality Mild Steel the surface of which is primer coated for anti rusting and is duly white stoved powder coated paint. Insulation between inner and outer wall is done with 75mm thick glasswool to prevent any heat loss.

Inner chamber is provided with 2/3 nos. perforated stainless steel shelves with ribs to adjust the shelves at desirable height. Provided with double door, inner made of thick transparent full view glass and outer door is double walled metallic properly insulated with glass wool and also provided with best quality handle, gasket, lock etc. Provided with door operated illumination lamp. Whole unit is mounted on castor  wheels.

Temp. Range is from 5°C to 60°C and is controlled by Electronically controlled by Digital temperature Indicator cum Controller with PT-100 sensor. This controller is provided with time delay relay to control the accuracy in maintaining the temperature. 
Temp. is maintained with an accuracy of ± 0.5°C .

Cooling is done with ISI Mark compressor of KIRLOSKAR make which is connected to thick copper coils placed in the rear of the chamber through condenser, fan motor, capacitor, relay etc. Whole cooling unit is placed below the main chamber in a GI housing. CFC Free, Environment friendly.

Heating is done with ISI mark strip type heaters placed near the cooling coils. Air is 
circulated by 2-nos. ISI mark Silicon binded motors, which are connected to balanced blowers, which operates alternatively and continuously with heating and cooling. Provided with On/ Off switch, Indicators, Digital Controllers etc.

SIZE INSIDE CHAMBER (Height x Width x Depth)
610 mm x 455 mm x 410 mm                 4 cu. ft.
830 mm x 505 mm x 515 mm                 6.1 cu. ft.
875 mm x 570 mm x 550 mm                 10 cu. ft.
900 mm x 600 mm x 600 mm               12 cu. ft. 
900 mm x 700 mm x 650 mm                15 cu. ft.